| Housing: |
Welded 20 gauge cold-rolled steel is powder coated after fabrication. Lamps, circuit board and batteries are contained in this shallow 3 1/2" deep by 3 3/4" wide by 15" long housing.
Stainless Steel also available.
|
| Inscription: |
Full 6" high 3/4" stroke red letters behind cut-out stencil face.
Field selectable chevron indicators
|
| Lamps: |
Letters are a full 6" high x 3/4" stroke, deep engraved around the edges, screened on a 3/16" acrylic panel. A mirror divider plate is included for double panel signs.
Inscription Options:
- Red Letters on Clear
- Green Letters on Clear
|
| Voltage: |
Operates on either 120v or 277v input.
Internal switches are set upon installation.
Low current transformer board circuit.
Red less than 57ma @ 120v, less than 26ma @ 277v.
Green less than 43ma @ 120v, less than 20ma @ 277v.
|
| Finish: |
White Enamel (standard)
Black
Bronze
Brushed Stainless Steel
|
|
|
| Battery: |
Back-up feature uses 6v Nickel-Cadmium battery. Two hour runtime exceeds standard NFPA 90 minute requirement.
Extended run times up to 10 hours available, with alternate batteries.
|
| Mounting: |
7/8" diameter knockouts are provided on top center and at one end. Canopy for outlet box mounting is included.
|
| Options: |
Inverted lettering
Self-diagnostic tester
Emergency Flash
Emergency Buzzer
Fire alarm interface, flash
Fire alarm interface, flash and buzzer
|
| Codes: |
Complies with UL 924, NEC and NFPA 101 Life Safety Code. ETL Listed.
|
| Dimensions: |
| |
Panel Size |
| Height |
6 7/8" |
| Width |
13 5/8" |
|
|
|
|
All products made in the U.S.A. - 
Environmentally Friendly