Safety Signs and Lighting, Inc.
Edge Lit
 
Extruded Aluminum
 
Die-Cast Aluminum
 
Cold-Rolled Steel
 
Vandal Resistant
 
Wet Location
 
Injection Molded
 
Lights & Accessories
 

Edge Lit Sign
Surface / End Mounted
With DC Battery Back Up

Specifications
Housing:

Welded 20-gauge cold rolled steel is powder coated after fabrication. Lamps and ballasts are contained in this shallow 4" deep by 4 3/4" wide by 15" long housing. Add 1/2" for mounting canopy.
Stainless steel also available.

Inscription:

Letters are a full 6" high 3/4" stroke with deep engraving around the letter edges. Screened on a 3/16" acrylic panel, the panel has polished edges and a rounded corner for a clear, crisp look. A divider plate is included for double panel signs. Arrows are full length underneath inscription.

Other combinations available:

  • Red letters on Clear
  • Red letters on White
  • Green letters on Clear
  • Green letters on White
  • Any custom color

Lamps:

Two F8T5 fluorescent lamps are included, each with a separate ballast.

Voltage:

120v or 277v


Finish:

White Enamel (standard)
Black
Bronze
Brushed Stainless Steel
Other custom finishes available

Operation:

Unit operates as a self-contained emergency system. Battery and charger are contained in the sign and meet UL 924 recharge requirements. Nickel Cadmium battery with 120 minute capacity with both lamps illuminated. Pilot light and test switch accessible through trim plate.

Mounting:

7/8" diameter knockouts are provided on top center and side center
Canopy is included.

Options:

Pendant mounting kit available, please specify stem length when ordering.

Codes:

Complies with UL 924, NEC and NFPA 101 Life Safety code.
Complies with Fire Prevention Bureau, City of Chicago.
UL Listed

Dimensions:
  Housing
Height 4"
Width 4 3/4"
Length 15"
 
 
Panel (Exit or Stairs)
Height, no arrows
6 7/8"
Height, with arrows 8 3/4"
Width 13 5/8"
Printable Detailed Drawing
PDF Format (1.6M)